Publications

Dr Nicholas Brooke

 
 

  1. Brooke, N. J., Bull, D. K., Henry, R. S., Elwood, K. J., Büker, F., and Hogan, L. S. (2022) Overview of Retrofit Requirements and Techniques for Precast Concrete Floors. SESOC J. 35(1), pp.30–54.

  2. Brooke, N. J. and Davidson, B. J. (2022) Experimental Investigation of the Performance of Concrete Columns After Repair of Minor Damage by Injection of Epoxy Resin. SESOC J. 35(2), pp.38–53.

  3. Büker, F., Brooke, N. J., Hogan, L. S., Elwood, K. J., Bull, D. K., and Sullivan, T. J. (2022) Design Recommendations for Strongback Retrofits. SESOC J. 35(1), pp.69–85.

  4. Büker, F., Elwood, K. J., and Brooke, N. J. (2022) Design Recommendations for Seating Angle Retrofits. SESOC J. 35(1), pp.55–68.

  5. Burlotos, C. A. G., Walsh, K. Q., Goded, T., McVerry, G. H., Brooke, N. J., and Ingham, J. M. (2022) Seismic Zonation and Default Suites of Ground-Motion Records for Time-History Analysis in the South Island of New Zealand. Bull. N. Z. Soc. Earthq. Eng. 55(1), pp.25–42.

  6. Elwood, K. J., Brooke, N. J., and Hogan, L. S. (2022) ReCast Floors Project: Overview and Key Recommendations. SESOC J. 35(1), pp.23–29.

  7. Liu, A., Hogan, L. S., Henry, R. S., and Brooke, N. J. (2022) Real World Experience of Seismic Performance and Retrofits Used in Buildings with Hollow-Core Floors. SESOC J. 35(1), pp.102–108.

  8. Parr, M., Büker, F., De Francesco, G., Sullivan, T. J., Elwood, K. J., Hogan, L. S., Bull, D. K., Brooke, N. J., and Liu, A. (2022) Load-Path and Stiffness Degradation of Floor Diaphragms in Reinforced Concrete Buildings Subjected to Lateral Loading - Part II, Data Analysis. SESOC J. 35(1), pp.172–204.

  9. Parr, M., Büker, F., De Francesco, G., Sullivan, T. J., Elwood, K. J., Hogan, L. S., Bull, D. K., Brooke, N. J., and Liu, A. (2022) Load-Path and Stiffness Degradation of Floor Diaphragms in Reinforced Concrete Buildings Subjected to Lateral Loading - Part I, Experimental Observations. SESOC J. 35(1), pp.149–171.

  10. Brooke, N. J., Tremayne, B., Elwood, K. J., and Pujol, S. (2021) ATC-145: Framework for Assessing the Extent of Repair Required for Earthquake-Damaged Concrete Moment Frames. in Proc. SESOC Conference, Hamilton, New Zealand.

  11. Büker, F., Brooke, N. J., Elwood, K. J., Bull, D. K., Hogan, L. S., and Parr, M. (2021) Development and Validation of Retrofit Techniques for Hollow-core Floors. in Proc. SESOC Conference, Hamilton, New Zealand.

  12. Elwood, K. J., Sarrafzadeh, M., Pujol, S., Liel, A. B., Murray, P., Shah, P., and Brooke, N. J. (2021) Impact of Prior Shaking on Earthquake Response and Repair Requirements for Structures – Studies from ATC-145. in Proc. NZSEE Conference, Christchurch, New Zealand. pp.12.

  13. Büker, F., Poland, C., and Brooke, N. J. (2020) Assessment of existing precast concrete floors: hollow-core worked example. J. Struct. Eng. Soc. N. Z. 33(2), pp.44–86.

  14. Brooke, N. J., Elwood, K. J., Bull, D. K., Liu, A., Henry, R. S., Sullivan, T. J., Hogan, L. S., and del Rey Castillo, E. (2019) ReCast Floors - Seismic Assessment and Improvement of Precast Concrete Floors. SESOC J. 32(1), pp.50–59.

  15. Brooke, N. J., Elwood, K. J., and Bull, D. K. (2019) ReCast Floors - Progress Towards Retrofit of Precast Floors. in Proc. SESOC Conference, Auckland, New Zealand.

  16. Parr, M., Bueker, F., Elwood, K. J., Hogan, L. S., Henry, R. S., Puranam, A., Bull, D. K., and Brooke, N. J. (2019) Development and Testing of Retrofit Solutions for Hollow-core Floors in Existing Buildings. in Proc. Concrete New Zealand Conference, Dunedin, New Zealand.

  17. Brooke, N. J. (2018) Revision of Part C5 Technical Guidelines for Engineering Assessments of Concrete Buildings. in Proc. Concrete New Zealand Conference, Hamilton, New Zealand.

  18. Brooke, N. J. (2018) On Hollowed Ground. EG Mag. Eng. N. Z. 2018(4), pp.42–43.

  19. Brooke, N. J. and Elwood, K. J. (2018) Summary of Proposed Changes to Section C5 of the Seismic Assessment Guidelines. in Proc. NZSEE Conference, Auckland, New Zealand.

  20. Hare, J., Bull, D. K., Elwood, K. J., Henry, R. S., and Brooke, N. J. (2018) Precast Double Tee Support Systems - 10 Years On. in Proc. Concrete New Zealand Conference, Hamilton, New Zealand.

  21. Henry, R. S., Parr, M., Brooke, N. J., Elwood, K. J., Liu, A., and Bull, D. K. (2018) Progress Towards Experimental Validation of Precast Floor Retrofit Solutions. in Proc. Concrete New Zealand Conference, Hamilton, New Zealand.

  22. Walsh, K., Henry, R. S., Simkin, G., Brooke, N. J., Davidson, B. J., and Ingham, J. M. (2016) Testing of Reinforced Concrete Frames Extracted from a Building Damaged during the Canterbury Earthquakes. ACI Struct. J.113(02), pp.349–362.

  23. Brooke, N. J. (2015) How Nominal is Any Structure’s Ductility? in New Zealand Concrete Industry Conference, Queenstown, New Zealand. pp.10.

  24. Brooke, N. J. and Davidson, B. J. (2014) Post-Earthquake Performance of Clarendon Tower Sub-Assemblies. SESOC J. 27(1), pp.41–50.

  25. Brooke, N J and Ingham, J M (2013) Seismic Design Criteria for Reinforcement Anchorages at Interior R/C Beam-Column Joints. Journal of Structural Engineering. 139(11): pp.1895-1905.

  26. Brooke, N J and Davidson, B (2013) Post-Earthquake Performance of Clarendon Tower Sub-Assemblies. in Proc. New Zealand Concrete Industry Conference. Queenstown, New Zealand.

  27. Brooke, N J (2012) A Review of the Suitability of Fibre Reinforced Concrete for Structural Applications in New Zealand. Journal of the Structural Engineering Society New Zealand. 25(2): pp.21-40.

  28. Brooke, N J and Davidson, B J (2012) The Allocation of Damage to Structures Resulting from an Earthquake Sequence. in Proc. SESOC NZ Conference. Auckland, New Zealand.

  29. Brooke, N J, Davidson, B J, Blain, S, and Clark, P (2012) Efficiency by Analysis: The Fonterra Dryer Plant, Darfield. in Proc. NZSEE Conference. Christchurch, New Zealand.

  30. Henry, R S, Brooke, N J, Sritharan, S, and Ingham, J M (2012) Defining Concrete Compressive Strain in Unbonded Post-Tensioned Walls. ACI Structural Journal. 109(1): pp.101-112.

  31. Green, S M F, Brooke, N J, McSaveney, L G, and Ingham, J M (2011) Mixture Design Development and Performance Verification of Structural Lightweight Pumice Aggregate Concrete. Journal of Materials in Civil Engineering. 23(8): pp.1211-1219.

  32. Brooke, N J and Ingham, J M (2011) The Effect of Reinforcement Strength on the Overstrength Factor for Reinforced Concrete Beams, in Proc. Pacific Conference on Earthquake Engineering, Auckland, New Zealand. 11p.

  33. Brooke, N J (2011) Improving the Performance of Reinforced Concrete Beam-Column Joints Designed for Seismic Resistance, PhD Thesis, Department of Civil and Environmental Engineering, The University of Auckland. New Zealand. 508p.

  34. Rogers, R, Al-Ani, M, and Brooke, N J (2008) Economy of 65/35 Hooked Steel Fibres to Replace Transverse Web and Flange Reinforcement in Pre-Stressed TT Flooring Units. in Proc. New Zealand Concrete Industry Conference. Rotorua, New Zealand.

  35. Brooke, N J, Wight, G D, Russell, A P, and Ingham, J M (2007) Unbonded Prestressed Panel Tendon Stresses at In-Plane Nominal Flexural Strength. in Proc. Ninth Canadian Conference on Earthquake Engineering. Ottawa, Canada.

  36. Brooke, N J, Ingham, J M, and Wight, G D (2007) Strut-and-Tie Modelling of Fibre Reinforced Precast Concrete Beam-Column Joints. in Proc. New Zealand Concrete Industry Conference. Taupo, New Zealand.

  37. Brooke, N J and Ingham, J M (2007) Testing of Fibre Reinforced Precast Concrete Beam-Column Joints. in Proc. Ninth Canadian Conference on Earthquake Engineering. Ottawa, Canada.

  38. Brooke, N J and Ingham, J M (2007) Seismic Resistant Precast Beam-Column Joints Incorporating Fibre Reinforced Connections. in Proc. Concrete 07. Adelaide, Australia: Concrete Institute of Australia.

  39. Brooke, N J, Walker, T H, and Megget, L M (2006) The Influence of Column Reinforcement on Bond Strength in Interior Beam-Column Joints. in Proc. 8th U.S. National Conference on Earthquake Engineering. San Francisco, California.

  40. Brooke, N J, Megget, L M, and Ingham, J M (2006) Bond Performance of Interior Beam-Column Joints with High Strength Reinforcement. ACI Structural Journal. 103(4): pp.596-603.

  41. Brooke, N J, et al. (2006) Assessing the Seismic Performance of "Green Concrete" Interior Beam-Column Joints. in Proc. Second fib Congress. Naples, Italy.

  42. Brooke, N J, Keyte, L M, South, W, Ingham, J M, and Megget, L M (2006) Seismic Performance of Inorganic Polymer Concrete Joints. Proceedings of the Institution of Civil Engineers, Construction Materials. 159(CM4): pp.171-179.

  43. Brooke, N J and Ingham, J M (2006) Advanced Fibre Reinforced Precast Concrete Beam-Column Joints. in Proc. New Zealand Concrete Industry Conference. Christchurch, New Zealand.

  44. Brooke, N J, Megget, L M, and Ingham, J M (2005) Factors to Consider in the Use of Grade 500E Longitudinal Reinforcement in the Beams of Ductile Moment Resisting Frames. Journal of the Structural Engineering Society New Zealand. 18(1): pp.14-22.

  45. Brooke, N J, Keyte, L M, South, W, Megget, L M, and Ingham, J M (2005) Seismic Performance of "Green Concrete" Interior Beam-Column Joints. in Proc. Australian Structural Engineering Conference. Newcastle, Australia: Engineers Australia.

  46. Brooke, N J, Megget, L M, Fenwick, R C, and Ingham, J M (2004) Bond Strength in Internal Beam-Column Joints Incorporating High Strength Reinforcement. in Proc. New Zealand Concrete Industry Conference. Queenstown, New Zealand.

  47. Brooke, N J, Megget, L M, Fenwick, R C, and Ingham, J M (2004) Bond Strength of Reinforced Concrete Beam-Column Joints Incorporating 500 MPa Reinforcement. Journal of the Structural Engineering Society New Zealand. 17(2): pp.37-46.

  48. Brooke, N J, Megget, L M, Fenwick, R C, and Ingham, J M (2004) Bond Strength of Reinforced Concrete Beam-Column Joints Incorporating 500 MPa Reinforcement. in Proc. 13th World Conference on Earthquake Engineering. Vancouver, Canada.

  49. Brooke, N J, Megget, L M, and Fenwick, R C (2004) Beam-Column Joint Tests with Grade 500E Reinforcement. in Proc. NZSEE Conference. Rotorua, New Zealand.